Product specification – SENA Parani-SD1000 User Manual
Page 8

8
1.3. Product Specification
Parani-SD1000
Serial Interface
One female DB9 serial port for data communication
Serial UART speed up to 921.6kbps
CTS/RTS flow control, DTR/DSR for loop-back & full transfer
Bluetooth Interface
Bluetooth v2.0 + EDR
Profile: Serial Port Profile
Class 1
Working distance:
Stub Antenna
-
Stub Antenna
100 meters
Stub Antenna
-
Dipole
Antenna
150 meters
Dipole
Antenna
-
Dipole
Antenna
200 meters
Dipole
Antenna
-
Dipole
Antenna
300 meters
Dipole
Antenna
-
Patch
Antenna
500 meters
Dipole
Antenna
-
Dipole
Antenna
400 meters
Dipole
Antenna
-
Patch
Antenna
600 meters
Patch
Antenna
-
Patch
Antenna
1,000 meters
Configuration
ParaniWIN, Modem AT command set
Firmware Update
ParaniUpdater
Diagnostic LED
Mode, Connect, Serial Rx/Tx, Charge, Low battery
Power
Supply voltage: 5V ~ 12V DC
Power consumption: 80mA@5VD Max
Battery
- Capacity
240 mAh(standard)
900 mAh(extended)
- Charging Power
Minium 5V/200mA
- Charging Time
Approximately 2 hours (standard)
Approximately 5 hours (extended)
- Battery life (Test based on 9600 bps data loopback. Actual battery life
varies by configuration, operating conditions and other factors)
Approximately 4.5 hours (standard)
Approximately 16.5 hours (extended)