Ocean Optics Ventana - Manual (Page 16)

Ventana Data Sheet
16 891-00000-200-05-201305
Message Type Purpose Input Data Output Data Notes
0x001 101 00 Get trigger
mode N/A Unsigned
byte
0x001 101 10 Set trigger
mode Unsigned
byte N/A Input has 1 byte in the request for
trigger mode.
Valid trigger modes:
Mode 0 (default): integration begins
as soon as possible after request
Mode 1: integration or trigger delay
begins with a rising trigger edge
Mode 2: integration is internally
triggered to synchronize with
continuous strobe
No reply.
0x001 801 01 Get wavelength
coefficient Unsigned
byte IEEE
single-
precision Request has 1-byte input data for
coefficient index starting with
wavelength intercept at index 0.
Reply has 4-byte float (LSB first).
0x001 801 11 Set wavelength
coefficient Unsigned
byte, IEEE
single-
precision N/A Input is the order of the coefficient to
set (indexing starts with wavelength
intercept at index 0), followed by an
IEEE single-precision float.
No reply.
0x001 811 01 Get nonlinearity
coefficient Unsigned
byte IEEE single
precision Request has 1-byte input for
coefficient index to retrieve. Reply has
4-byte float (LSB first).
0x001 811 11 Set nonlinearity
coefficient Unsigned
byte, IEEE
single
precision N/A Input is the order of the coefficient to
set, followed by an IEEE single-
precision float.
No reply.
0x001 831 01 Get stray light
coefficient Unsigned
byte IEEE single
precision Input is the order of the coefficient to
retrieve
0x001 831 11 Set stray light
coefficient Unsigned
byte, IEEE
single
precision N/A Input is the order of the coefficient to
set, followed by an IEEE single-
precision float