Ocean Optics HPX-2000-HP-DUV - Manual (Page 24)

A: Bulb Replacement
16 000-10000-081-02-201207b
5. Remove the four recessed screws (Figure 2, #1), both front and back on both sides of the HPX-
2000-HP-DUV.
6. Remove the cover housing of the HPX-2000-HP-DUV.
Figure 1 Figure 2
7. Loosen the screws (Figure 3, #5) by hand, disconnect the plug (Figure 3, #6), and remove the old
bulb from the HPX-2000-HP-DUV.
8. Place the new HPX-2000-HP-DUV-BM bulb inside the housing, connect the plug, and replace
the screws.
9. Close the housing and screw the 4 screws (Figure 2, #1) into the sides of the housing.
10. Replace the cap (Figure 2, # 3) and the beam-cover (Figure 2, #4).
Figure 3
1
2
4
3
6
5