Upgrades, Service – Ocean Optics USB2000+ Install User Manual
Page 6
About This Manual
iv
270-00000-000-02-201107
Detailed instructions for External Triggering for firmware versions below 3.0 are located at:
Detailed instructions for External Triggering for firmware versions 3.0 and above are located at:
.
Engineering-level documentation is located on our website at Technical → Engineering Docs.
You can also access operating instructions for Ocean Optics products from the Software and Technical
Resources CD that ships with the product.
Upgrades
Occasionally, you may find that you need Ocean Optics to make a change or an upgrade to your system.
To facilitate these changes, you must first contact Customer Support and obtain a Return Merchandise
Authorization (RMA) number. Please contact Ocean Optics for specific instructions when returning a
product.
Service
Our Total Technical Service protection plans protect your spectrometer for one year for any contingency -
- no matter what the circumstances, including total loss. Under these plans, Ocean Optics will repair or
replace your instrument with no deductible or any other out-of-pocket expense required from you. USB
service plans include the following:
TTS-USB: Protects your Ocean Optics USB spectrometer for any contingency for 1 year.
Provides for full spectrometer replacement, if necessary. Limited to 1 full replacement per year.
TTS-USB-E: This special plan for Ocean Optics USB spectrometers not previously covered
protects for any contingency for 1 year. Provides for full spectrometer replacement, if necessary.
Limited to 1 full replacement per year. This coverage starts 30 days after purchasing the plan.
In addition, we also have the WAVECAL-USB spectrometer maintenance and calibration service
available to recalibrate, clean and perform any adjustments necessary on your USB2000+ Spectrometer.
Contact us to learn more about these great service plans.