Ocean Optics MonoScan2000 - Manual (Page 19)

000-10000-150-02-201011 11
Appendix A
Specifications
This section provides information on the operating environment and physical specifications of the
MonoScan-2000.
Operating Environment
The following table provides information on optimizing the operating environment of your MonoScan-
2000.
Operating Environment The MonoScan-2000 Unit . . .
Moisture Is designed for operation in dry rooms only.
Ventilation Should be situated so that its location or position does not interfere
with proper ventilation.
Heat Should be situated away from any device that emits excessive heat.
Object and Liquid Entry Should be positioned so that objects do not fall on top of the unit.
Additionally, ensure that no liquids are spilled into the enclosure
through openings.
Power Sources The unit should be connected to a power supply only of the type
described in the operating instructions or as marked on the unit.
Physical Specifications
Specification Value
Wavelength range 300 – 700 nm
FWHM 4 – 9 nm (400 –1000 fiber)
Holographic grating 1250 l/mm, Blaze 350nm
Accuracy <0.5nm
Repeatability 0.2nm
Transition speed (wavelength-to-wavelength) Approximately 3s 300-700nm 1nm step ~ 15ms
Dispersion Approximately 10nm/mm