Ocean Optics MonoScan2000 User Manual
Page 10
1: Setup
2
000-10000-150-02-201011
Unpacking the MonoScan-2000
►
Procedure
1. Unpack the MonoScan-2000 carefully. Dropping this instrument can cause permanent damage.
2. Inspect the outside of the instrument and make sure that there is no damage. Do not use the
instrument if damage is present. Contact your dealer for repair or replacement information, if
necessary.
3. Use this instrument in a clean laboratory environment.
4. Submit the Registration Card to for warranty and support purposes.
Contents
Your MonoScan-2000 package should contain the following:
MonoScan-2000 main system
MonoScan-2000 12VDC power supply
Caution
Before using the power supply of the MonoScan-2000 for the first time, inspect the item
for transport damage. Be sure to adhere to all warnings on the unit and in this operational
manual.
Software CD (contains MonoScan-2000 software and calibration software)
Ocean Optics Software & Technical Resources CD (contains manuals)
RS232 connection cable
Quick Start
►
Procedure
1. Install the software delivered with the MonoScan-2000 (double-click on Setup.exe)
2. Connect the power supply to main connection.
3. Connect the power supply to the MonoScan-2000.