Setup, Overview, Setting up the hl-2000-hp-232 light source – Ocean Optics HL-2000-HP-232 User Manual

Page 9: Unpacking the light source, Chapter 1

Text mode
Original mode

000-10000-140-02-201307

Chapter 1

Setup

Overview

The high-power Halogen Light Source with attenuator and shutter uses a 20-watt bulb for applications
requiring large-diameter optical fibers, or fiber and probe bundles. The attenuator and shutter can be
controlled by a series of ASCII commands issued by a host computer via RS-232.

Setting Up the HL-2000-HP-232 Light Source

Unpacking the Light Source

►

Procedure

1. Unpack your new equipment carefully. Dropping this instrument can cause permanent damage.