QTECH SmartEdge 600 Configuration - Manual (Page 25)

Configuration and Operations
Table 26 Global Subscriber Accounting
Task Root Command Notes
Enable global
subscriber session
accounting update
messages. aaa global update subscriber Enter this command in global
configuration mode.
Updated accounting records for
the subscriber sessions in all
the contexts are sent to one or
more RADIUS accounting servers
with IP addresses or hostnames
configured in the local context.
Enable global
accounting messages
for the reauthorize
command. aaa global accounting reauthorization
subscriber Enter this command in the global
configuration mode.
Accounting messages for the
reauthorize
command issued
in any context are sent to one or
more RADIUS accounting servers
with IP addresses or hostnames
configured in the local context.
Enable global
accounting messages
for the subscriber
session DHCP lease,
DHCPv6 prefix
delegation (PD),
reauthorization, or
ANCP events. aaa global accounting event Enter this command in global
configuration mode.
Accounting updates for the
following are sent to one or more
RADIUS accounting servers
with IP addresses or hostnames
configured in the local context:
• DHCP lease
• DHCPv6 PD
• IPv4 and IPV6 single
• stack to dual-stack transitions
• IPv4 and IPV6dual-stack to
single-stack transitions
• reauthorization
• ANCP events for subscriber
sessions in all contexts
2.4.3.2 Configure Context-Specific Subscriber Accounting
To configure context-specific subscriber accounting, perform the tasks
described in Table 27. Enter all the commands in the context configuration
mode.
21 61/1543-CRA 119 1170/1 Uen L | 2012-12-04