Pfister GT26-3NSS - Manual (Page 4)

ENGLISH
ENGLISH
11
12
13
14
11 SIDE SPRAY INSTALLATION
Insert Side Spray Hose (11A) through Hose Guide (11B).
12 SOAP DISPENSER INSTALLATION
Pour in liquid soap (not included) into Guide Orifice (12A). Insert Pump Mechanism (12B)
into Soap Dispenser Guide (12C). Install Dispenser Head (12D) by pushing firmly onto
Pump Mechanism (12B).
13 DIVERTER INSTALLATION
Push Diverter Tee (13A) all the way up until completely seated onto Mounting Shank
(13B). Slide Clip (13C) into Diverter Holes (13D), to secure unit.
When installing without side spray, a One Way Connector (13E) 970-037 must be used
and is to be ordered separately.
14 HOSE ATTACHMENTS
From underneath sink, push Outlet Hose Fitting (14A), firmly onto the Diverter Receiving
Tube (14B) until unable to push any further. Connect Spray Hose Fitting (14C) into Diverter
Outlet Collet (14D) until unable to push any further. Pull on connection Fittings (14A &
14C). If the Fittings (14A & 14C) and the Inner Collets (14E) separate slightly but do not
pull off, the connections are secure.
4
11B
12B
12A
12C
12D
11A
13B
13C
13C
13D
14B 14D
14C
14A
14C
14D
14B 14A
14E 14E
13E
13A