Crown Audio PIP-Lite Module - Manual (Page 10)

Networked PIP Series
page 10 Reference Manual
1.1 Unpacking
The unit is shipped in a protective antistatic bag. CAUTION: STATIC ELECTRICITY
MAY DAMAGE THE UNIT. Use caution when handling the unit. Carefully ground your-
self BEFORE touching the unit. Avoided unnecessary touching the components or solder
pads on the circuit board. It is best to handle the unit by its front panel only.
Please unpack and inspect the unit for damage that may have occurred during transit. If
damage is found, notify the transportation company immediately. Only the consignee may
initiate a claim with the carrier for shipping damage. Crown will be happy to cooperate fully
as needed. Save the shipping carton as evidence of damage for the shipper's inspection.
Even if the unit arrived in perfect condition, as most do, save all the packing materials.
NEVER SHIP THE UNIT WITHOUT THE FACTORY PACK.
1.2 How to Use This Manual
This manual provides you with the necessary information to safely and correctly set up and
operate your amplifier accessory. It does not cover every aspect of installation, setup or
operation that might occur under every condition. For additional information, please con-
sult Crown Tech Support, your system installer or retailer.
We strongly recommend that you read all instructions, warnings and cautions contained in
this manual. Also, for your protection, please send in your warranty registration card today,
or register online at
www.crownaudio.com . And save your bill of sale – it’s your official
proof of purchase.