Crown Audio PIP-USP4 Module - Manual (Page 6)

Networked PIP Series
Reference Manual page 6
A B C
D F G H E I
PIP-USP4-CN Controls, Indicators and Connectors
(Note: Actual Product Artwork May Vary Slightly)
PIP-USP4-CN
A. Balanced Analog Audio Input Connector
3-pin removable barrier-strip connectors.
B. Balanced Analog Audio Output Connector
3-pin removable barrier-strip connectors.
C. AES Digital Audio
3-pin removable barrier-strip connectors.
D. Network Connector
RJ-45 connector for HiQnet control and CobraNet Digital Audio to a 100Mb
Ethernet Network.
E. AUX Connector
AUX input or AUX output. Foldback is available through CobraNet.
F. Preset Indicator
LED fl ashes to signal the number of the current preset. LED is green if the preset
values have not been changed once loaded. LED is yellow if the preset values have
been changed since they were loaded.
G. Reset/Preset Switch
Used to change presets, restore settings to factory default or restore all the presets
to the factory defaults. During operations of the switch, the Data indicator fl ashes
as an aid to the user.
H. Data Indicator
Flashes when the PIP module receives a valid command that is addressed to the
USP4-CN.
I. Mounting Holes