3B Scientific 3B NETlog™ with Ethernet Port (230 V, 50__60 Hz) User Manual
Page 9
9
•
Connect the 3B NETlog™ equipment to a com-
puter via USB cable.
•
Start 3BNETdata and click on the tab “Read Data”.
•
Press Read and wait till the progress bar
reaches 100%.
•
Select the measurements you wish to be saved
from the list on the left.
•
Select columns that are to be written next to
the data.
•
Click Save selected data to files.
•
Enter a file name for each measurement, or
accept the default name.
•
For further processing of the saved data, use
spreadsheet or data analysis programs.
11. Update Firmware
•
In the 3B
NETdata software, click “Update
firmware” tab.
•
Follow the instructions in the left-hand section
of the software window and click “Start” in the
options box.
The current version of the firmware will now be
installed automatically. As an alternative, use
“Browse” in the options’ box to search and install
older firmware versions.
12. Format of exported files
Exported files have the following format (the words shown here between the delimiters <> are simply place-
holders for actual data. Entries are separated by tab characters. Depending on the settings, some columns may
be omitted):
#
Index (tab) Absolute date/time (tab) Relative time (tab)
(tab) Dig D(return)
1(tab)
2(tab)
etc.