Dowco Power Sports Sport Saddlebags - Manual (Page 2)

D0WCO, Inc.
4230 Clipper Drive
Manitowoc, WI 54220
Fax: 920-682-5891
Phone: 1-800-558-7755
Item # 141465-00
Rev. 4/6/05
Printed in China
Care & Cleaning:
Use a mild detergent and soft brush to remove dirt or road grime from the bags. Rinse thor-
oughly and dry before using. Do not put in washer or dryer. Dry-cleaning is not recommended.
Note: Your bags are manufactured from heavy-weight waterproof polyester materials.
However, in the event of heavy rain, moisture may enter the bags through seams or zippers.
It is highly recommended that important papers, valuable items, or clothing be wrapped in
plastic for added protection.
Overloading any saddlebag will result in a high center of gravity, causing
bike to become top heavy and susceptible to unexpected tipping on lean-
in while negotiating high speed turns. SADDLEBAGS MUST BE LOADED
EVENLY SIDE-TO-SIDE. MAXIMUM ALLOWABLE LOAD LIMIT IS 7 LBS.
Attaching Tail Bag to Saddlebags
1. Install saddlebags on bike per instructions.
2. Place Tail Bag on tail section of bike with handle toward the rear.
3. Position rear strap under license plate bracket or around fender. Attach buckle.
4. Open exterior side compartments and extend both buckles on each side.
5. Insert 4 buckles from Tail Bag into matching buckles on saddlebag.
6. Adjust rear strap for snug fit to bike. Do not overtighten.