Dowco Power Sports Fastrax Hydration Bladder - Manual

Item # 01074
12/5/06
Page 1
Printed in China
accessories
uni
versal
Care and Use Instructions
Hydration Bladder
Please Read! Please read and understand these instructions completely before installa-
tion to avoid possible injury to yourself, or damage to the accessory or vehicle. Read all
Cautions, Warnings and Notes within installation instructions and on bags. If you are
unsure about securing the bladder, please contact us at 1-800-558-7755 ext. 123.
Monday through Friday 8:00 am - 4:30 pm CST
1. PARTS LIST:
This Product contains the following components. Before beginning installation confirm there are no
missing or damaged components.
Item # Description Qty
1. Hydration Bladder 1
2. PREPARATION:
a. Before using your Guardian Hydration bladder for the
first time, rinse out the inner bladder using clean
water. This will help remove any plastic taste from
the material.
b. We recommend filling the bladder only with water as
other liquids may leave lingering tastes and odors.
c. To fill the bladder, unscrew the large fill cap at the
top and fill with water.
d. When the bladder is full, secure the cap tightly to
prevent liquid from escaping.
3. INSTALLATION:
a. Bladder can be used with many different bags. We recommend using it with the Tank Bag of the
Fastrax Elite Sport Bike Luggage.
b. To install the bladder into the Tank Bag you must open the lid of the Tank Bag.
c. Once open you will find a compartment located in the lid. Unzip to open. (Fig 1)
d. Unscrew the tube from the Hydration Bladder. (Fig. 2)
DOWCO, Inc. Fax: 920-682-5891
4230 Clipper Drive Phone: 1-800-558-7755
Manitowoc, WI 54220 Website: www.dowcopowersports.com
* Keep out of the reach of infants and small children.
* Hydration Bladder is to be used ONLY when bike is
parked!
! WARNING
Fig. 2
Fig.1
Compartment