Dowco Power Sports Guardian Trailerable ATV Cover User Manual
Trailerable atv cover

#00347-00
Page 1
Revised 4/14/04
Trailerable ATV Cover
4230 Clipper Dr. Manitowoc WI. 54220 U.S.A
Phone: (800) 558-7755 - Fax (920) 682-5891 - Email: [email protected]
Visit our web-site! - www.dowco-inc.com
Begin by adjusting the cover so that all straps are loosened and zippers are undone. Locate the tag on
the inside of the cover. This is the back of the cover.
The cover must be placed over the back rack, fenders, and seat first.
Then the
front of the cover should be pulled around the front rack
.
The cover must be pulled around to where it will meet correspon-
ding zippers.
Important: Once the cover is posi-
tioned properly take time to adjust it
so that it is pulled down tightly around
the wheels and handlebars. DO NOT
tighten any straps yet!
Continue by zipping the handlebar pouch closed,
then zip the side zipper to enclose the ATV. Zipper
heads should be secured to prevent accidental release
while trailering.
APPLYING THE COVER:
DO NOT apply this cover while the engine is running. DO NOT apply
this cover to an ATV that is on uneven or unstable ground. If trailering
the ATV be sure to load ATV first. Be sure trailer is secure and stable
Engage the parking brake before applying the cover!
1.
2.
3.
4.