Dowco Power Sports Guardian EZ Zip ATV Cover - Manual

Installation
Carefully read the instructions before initial installa-
tion. Unfold cover. Locate the “FRONT” tag at the
front of the cover. Starting in the front of the ATV,
position the cover on top of the unit. Carefully pull
over handlebars, racks, etc. Working toward the
rear of the ATV, slide the cover down the sides,
avoiding “snag” points. Position the cover around
the rear of the ATV and close zipper.
Caution: To avoid damage to ATV finish, ensure
that the protective flap sewn behind the zipper
rests between the ATV and the zipper during
cover installation.
The elastic hem should pull the cover tightly around
the wheels. The cover is designed to reach over
most front/rear rack combinations and cover most
of the wheels.
Caution: Avoid placing the material against hot
engine components as melting or burning may
occur.
Caution: Mirrors, foot pegs, muffler ends, etc.
are common wear points. Do not allow fabric to
"snag" around them.
Care and Cleaning
Your cover requires very little maintenance. Normal
dirt and grime should be brushed off with a soft terry
cloth or removed with warm water using a sponge
or terry cloth.
Caution: Do not use detergents or wash in a
clothes washing machine. Do not use a clothes
dryer.
The cover should be thoroughly dried before using
or long term storage while folded.
A water-repellant spray material, such as 3M
Scotchguard
® is recommended for increased water
resistance.
Although treated with UV inhibitors, the fabric may
fade in direct sunlight after continuous use. This is
normal wear.
Important
Failure to comply with the above direction may
reduce the life of your cover. If you have any ques-
tions or comments, please contact your dealer or
DOWCO, Inc.
Congratulations on your purchase of a Guardian ® EZ Zip ™ ATV cover. Properly cared for, your cover will
last for many years of service. The Guardian ® EZ Zip ™ ATV cover is a premium all-weather cover manu-
factured from heavy-duty urethane coated nylon fabric which has excellent water and weather resistance
and may be used either inside or outside. Your cover also contains an elastic shock cord that is sewn into
the hem. This feature keeps the cover tight around your ATV. The following information should be used
to ensure maximum longivity:
NOTE: This cover is designed for a variety of ATVs. If you are uncertain that your cover is fitting proper-
ly, please contact your dealer or DOWCO to verify your fit before attempting first-time use.
This cover is not designed to cover your ATV while trailering. You will void your Warranty.
INSTRUCTIONS FOR THE INSTALLATION OF A ZIPPERED ATV COVER
This cover must be completely removed prior to starting
or operating the vehicle. Failure to do so could result in
serious injury and/or property damage.
Item: 00353
Revised 06/04
Printed in China
4230 Clipper Drive Manitowoc, WI 54220 U.S.A.
Phone: (800) 558-7755 - Fax: (920) 682-5891 - Email: [email protected]
Visit our Web Site! - www.dowco-inc.com