dbx iEQ15 - Manual (Page 13)

9 iEQ User Manual
iEQ
CHANNEL 2 Live Filter Lift Time Menu
Live Filter Lift Off Live Filter Lift Shor
t
Live Filter Lift Long
Power Up Menu
Live Filter Lift T
ime
CHANNEL 1
• Live Filter Lift Off: Selecting this option will disable the Live Filter Lift feature�
• Live Filter Lift Short: This option sets the Live Filter Lift Time to 10 minutes, at which
time the AFS algorithm will determine if the filter needs to remain or if it can be cleared�
• Live Filter Lift Long: This option sets the Live Filter Lift Time to 60 minutes, at which
time the AFS algorithm will determine if the filter needs to remain or if it can be cleared�
AFS Normal vs. 6-Fixed/6-Live Menu - To select the AFS Normal vs� 6-Fixed/6-Live menu, press
and release the CHANNEL 1 button until the CHANNEL 1 +10 LED is lit as shown in the
proceeding illustration� Now press and release the CHANNEL 2 button to toggle through the
available options which are displayed on the CHANNEL 2 OUTPUT LEVEL meter as shown in the
proceeding illustration�
Power Up Menu
AFS Normal vs.
6-Fixed/6-Live
CHANNEL 1 CHANNEL 2
AFS Normal vs.
6-Fixed/6-Live Menu
AFS Normal Mode (All Live) 6-Fixed/6-Live Mode
• AFS Normal Mode: This mode provides 12 Live filters and no Fixed filters� Use this mode
when you want to get up and runing quickly and do not require any Fixed filters to be stored�
• 6-Fixed/6-Live Mode: This mode provides 6 Fixed filters and 6 Live filters� Use this mode
when you intend to ring out the system before use (using the Fixed filters) and also require
Live filters for feedback suppression control during the performance� This mode is often best
suited for fixed installation�
3. Exiting the Power-Up Mode Menus
Once your selections have been made, press and hold the CHANNEL 1 button until the
CHANNEL 1 meter LEDs begin to flash, then release and wait a few seconds for the iEQ to boot�
Operation