Prokit's Industries SS-227 - Manual (Page 6)

6
Aoyue 936 规格 Aoyue 936 规格 OPERATING GUIDELINES
REMINDERS:
1. Make sure the equipment is placed on a flat stable surface and
all the heat-generating components placed on their respective
holders or stands.
2. Ensure all switches are OFF before connecting to mains.
3. Ensure all terminal connections are properly secured
A. INITIAL PROCEDURES
1. Insert the power cord into the receptacle at the back of the station.
2. Plug the power cord into a grounded wall socket. The station is
protected against electrostatic discharge and must be grounded for
full efficiency.
3. Be sure the power switch is OFF before connecting or disconnecting
the soldering iron cord. Failure to do so may result in damage to
the circuit board.
4. Install solder wire to the solder iron holder.
5. Attach the soldering iron to the output at the bottom right area of
the station.
6. Place soldering iron to the soldering iron stand as shown in the fig-
ure below.
7. Dampen the sponge with water and squeeze dry before using. The
tips maybe damaged when used with dry sponge.
8. The unit is now ready for use.
15
控制指南
功能与特点
• CPU控制，防静电设计。
• 陶瓷加热器。
• 可以用来焊接无铅锡。
• 大功率发热芯可快速加热和恒温。
• 手柄设有摇动感应器。
• 可选摄氏或华氏的显示方法
• 设有自动睡眠功能。
• 系统锁定功能。
• 计时显示
• 数字校准
显示设置/实际温度
设置温度加/减
设定按键
电源开关
烙铁连接插口
计时显示
保险管
电源插座
微调