beautypg.com

Prokit's Industries SS-593 Series User Manual

Ss-593 series smoke absorber, User’s manual, Instruction manual

background image

User’s Manual

PROKIT’S INDUSTRIES CO., LTD
http://www.prokits.com.tw
E-mail: [email protected]

©2010 Prokit’s industries Co., Ltd. All rights reserved. 2010001(C)

Filter

Filter Guide

Stand

Knob

Power Switch

Instruction Manual

SS-593 Series Smoke Absorber is a portable and desktop smoke eater, easy to place and move, low noise and long life service. It is

designed to absorb 80% of potentially harmful contaminants that are released with the smoke while solde ring for protecting solders’ health.

Filtration is accomplished with an activated carbon -impregnated urethane filter.

SS-593 is a newly developed product with a high performance fan and an activated carbon filter designed to absorb flux and lead fumes

Safety Note

The appliance is not intended for use by persons(including children)with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible

for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Warning

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a

hazard.

Please make sure Smoke Absorber is disconnected with power supply before taking off the protective apparatus.

Specification

Item No.

SS-593A

SS-593B

SS-593H

Voltage & Watt

110-120V 23W

220-240V 23W

220-240V 23W

Power code

A type 1.5M

B type 1.5M

H type 1.5M

Capacity

1m

3

/min(max)

Dimension

220*270*168mm

Weight

1,400g

Accessories

Filter (2 Pieces)

Optional Accessories

Activated-Carbon Filter

Item No

5SS-593-F

Size

130x130x10mm

Amount of activated-carbon filter

7g

Max. absorbing weight of noxious

components per one filter

2g

Operating Instruction

1.

Open the Filter Guide, and install the activated carbon

filter.

2.

Then close the filter guide

3.

Loosen the knob and adjust the angle

Replacing the filter

Under normal operating conditions, the filter should be replaced

since absorption capacity decline.

The filter may also need replacement when the dust adheres.

(Never allow the filter to become wet.)

SS-593 Series Smoke Absorber