Newport Brass 16-51 - Manual (Page 2)

AMS-16-51
WALL MOUNT ONLY
SHADE UP INSTALLATION ONLY
1
Preparing Wall Outlet
A. Check fit the light fixture base over outlet box to ensure
cutout in wall will be covered completely after installation.
B. Pull live, neutral and ground wires out of electrical outlet
box.
C. Thread mounting screws through mount strap with all-
thread nipple facing outward as shown and attach to outlet
box.
D. Be sure mounting strap is flush with wall surface.
B
C
CAUTION: DISCONNECT POWER
Always shut off power when installing or repairing this, or any other electric appliance.
FAILURE TO DO SO MAY RESULT IN SEVERE INJURY OR DEATH
Installation by a licensed electrical contractor recommended.
2
Wire Light Fixture to Outlet
Support Fixture during wiring process.
A. Strip, clean and twist together black fixture wire with
live outlet wire. Next, strip, clean and twist together white
fixture wire with neutral outlet wire. Use wire nuts to
secure connections and cover all exposed wires.
B. Connect fixture/outlet ground wire(s) to mount plate
using washer and ground screw.
A
B