Newport Brass 280M - Manual

page 1 of 2 spec_
NEWPORT BATH
280M
280M
Handshower Set
Features
• Solid brass construction
• Contemporary styling
• Single function spray
• Rubber nozzles with finished spray surface
• Handshower incorporates twin back-check valves
• 1/2" NPT inlet elbow fitting
• 2" x 2-1/2" (5.1 cm x 6.4 cm) spray area
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAPMO/cUPC
• IPC
• Energy Policy Act of 1992
• All applicable US Federal and State material regulations
Product Specification:
The Handshower Set shall be of solid brass construction. Handshower Set shall have a single function shower engine incorporating rubber
nozzles to facilitate easy cleaning. Handshower Set shall incorporate twin back-check valves within the handshower handle. Handshower
Set shall have a 1/2" NPT inlet elbow fitting and 2" x 2-1/2" (5.1 cm x 6.4 cm) spray area while operating at 2.0 gallons (7.6 liters) per
minute maximum flow rate. Handshower Set shall be Newport Brass Model 280M/___.
Add "Color / Finish" suffix to Model number, below.
Colors / Finishes
15:
15S:
26:
10B:
Polished Nickel
Satin Nickel
Polished Chrome
Oil Rubbed Bronze
• Other: Refer to the Newport Brass catalog for
additional color/finish options.
©2011 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
Specified Model
Model Description Colors / Finishes
280M Handshower Set 15 15S 26 10B Other