Newport Brass 280 - Manual

page 1 of 2 spec_
NEWPORT BATH
280
280
Handshower
Features
• Solid brass construction
• Traditional styling
• Single function spray
• Finished spray surface
• Incorporates twin back-check valves
• 1/2" NPSM inlet fitting
• 2" (5.1 cm) showerhead diameter
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAPMO/cUPC
• IPC
• Energy Policy Act of 1992
• All applicable US Federal and State material regulations
Product Specification:
The Handshower shall be of solid brass construction. Handshower shall have a single function spray pattern incorporating a finished spray
surface. Handshower shall incorporate twin back-check valves within the handle. Handshower shall have a 1/2" NPSM inlet fitting and 2"
(5.1 cm) showerhead diameter while operating at 2.0 gallons (7.6 liters) per minute maximum flow rate. Handshower shall be Newport
Brass Model 280/___.
Add "Color / Finish" suffix to Model number, below.
Colors / Finishes
15:
15S:
26:
10B:
Polished Nickel
Satin Nickel
Polished Chrome
Oil Rubbed Bronze
• Other: Refer to the Newport Brass catalog for
additional color/finish options.
©2011 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
Specified Model
Model Description Colors / Finishes
280 Handshower 15 15S 26 10B Other