Newport Brass 2500-5103 User Manual
Page 2
NWP-2500-5103
Figure 1
Figure 1a
1
3
2
Mounting
surface
hole
Recommended Installation by a Professional Plumbing Contractor
Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recom
mend the use of clear silicone sealing materials.
If mounting faucet to stainless steel rim, an under-mount support, (e.g. wood, appropriate size x 1/2”
thick), should be utilized.
1. Drill hole in mounting surface. Recommended deck hole Ø1.350”, not to exceed Ø1.562”.
2. Place O-ring (2) on underside of base RING (1).
See
Figure 1a.
3. Insert Hoses through hole in mounting surface. Secure
into place with MOUNTING KIT (3).
See Figure 1.
4. Attach hot/cold spout supply directly to valves in the
wall.
See Fig. 2.
5. DO NOT remove the HOSE (6) from SPOUT (4). SEE
Figure 3.
6. Remove SPRING (9) from support and slide onto
HOSE (6).
REV A
1
Figure 2
5
4
Figure 3
6
4
DO NOT REMOVE
ZIP TIE
3/8” COMPRESSION
OUTLET
9/16-24 UNEF
(FOR 3/8” COMPRESSION
OUTLET )
See Detail A
Detail A
Figure 4
7
8
8
6
9
5
Figure 4a
6