Newport Brass 16-29 - Manual

Recommended Installation by a Professional Contractor
1. Using the table below, measure the appropriate distance between post centers. See
Fig. 1. Note: Hole locations should be level.
· 18" Single Towel Bar - 18 13/16"
· 24" Single Towel Bar - 24 13/16"
· 30" Single Towel Bar - 30 13/16"
· Tissue Holder (2 Post) - 6 1/4"
· Tissue Holder (3 Post) - 6 1/4" (2x), See Fig. 2.
2. Drill hole(s) in wall at points marked using the appropriate drill size:
· Wood Screw (#6 x 2”) - use: 3/32" Drill
· Toggle Screw (6-32 x 3”) - use: 3/8" Drill
3. Fasten FLANGE (1) to wall using either WOOD/TOGGLE SCREW (2). See Fig. 3.
4. Place ESCUTCHEON (3) over FLANGE (1). See Fig. 4.
5a. Towel Bars: Assemble TOWEL BAR (6) to END POST (5). Place END POST (5)
onto FLANGE (1) and secure into place with SETSCREW (4). See Fig. 5.
5b. Towel Ring / Robe Hook: P lace END POST (5) onto FLANGE (1). Secure into
place with SETSCREW (4). See Fig. 6.
5c. Tissue Holder (2 & 3 Post): Place END POST (5) onto FLANGE (1) and
secure into place with SETSCREW (4). Place HOLDERS (7) between END POST
(5). See Fig. 7.
Towel Bar / Towel Ring / Robe Hook / Tissue Holder
Installation Instructions
Model No.
16-01, 16-02, 16-03, 16-09, 16-12, 16-28, 16-29
Distance between
posts
Fig. 1
Fig. 2
Fig. 3
2
1
3
Fig. 4
Fig. 5 Fig. 7
1
4
4
5
7
5
5
1
Distance
between
posts
Distance
between
posts
1
1
1
5
6
4
Fig. 6
1
5