Newport Brass 2-222 Newport 365 - Manual

page 1 of 2 spec_
Shower Trim
NEWPORT 365
3-7004
The single-control Shower Trim shall be made of solid brass construction. Shower Trim shall include showerhead with arm and
flange and faceplate and escutcheon. Specified handle (lever or cross) is ADA compliant when used with Shower Trim. Showerhead
shall have a maximum flow rate of 2.0 gallons (7.6 liters) per minute. Shower Trim shall be Newport Brass Model 3-7004BP/____
and single-control Shower rough valve shall be Newport Brass Model 1-594. Required Handle for Shower Trim shall be 2-_____/
____.
Required Accessory:
Application Tub Only Valve* Shower (or Tub) Valve Tub & Shower Valve Shower System Valve Control Valve
Description 2-Cartridge Assembly Balance Pressure (BP) BP w/ Diverter Thermostatic Diverter (3/4 port)
Inlet/Outlet Size 1/2" 1/2" 1/2" 3/4" 1/2"
Part Number
NA 1-594 NA NA 1-617
Image
Also 2-116, 2-222
3-7004
2-116
2-222
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAPMO/cUPC
• IPC
• ADA
• ICC/ANSI A117.1
• ASSE 1016
• Energy Policy Act of 1992
• All applicable US Federal and
State material regulations
Features
• Solid brass construction
• Face plate with handle escutcheon
• 2.0 gallons (7.6 liters) per minute maximum flow rate showerhead
• Specified handle (lever or cross) is ADA compliant when used with Shower Trim
• Intended for use with Newport Brass rough valve(s) as specified (Required Accessory)
Colors / Finishes
10B: Oil Rubbed Bronze
15: Polished Nickel
15S: Satin Nickel
26: Polished Chrome
Other: N/A
Model Description Colors / Finishes
3-7004 Shower Trim
10B 15 15S 26
2-116 Lever Handle for Shower Trim
10B 15 15S 26
2-222 Cross Handle for Shower Trim
10B 15 15S 26
t: 949.417.5207 | www.newportbrass.com 3-7004_rev-a