Newport Brass 281-1 - Manual

page 1 of 2 spec_
NEWPORT BATH
281-1
281-1
Handshower
Features
• Solid brass construction
• Traditional styling
• Multi-function engine with 3 spray modes
• Rubber nozzles facilitate easy cleaning
• Incorporates twin back-check valves
• 1/2" NPSM inlet fitting
• 4" (10.2 cm) showerhead diameter
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAPMO/cUPC
• IPC
• Energy Policy Act of 1992
• All applicable US Federal and State material regulations
Product Specification:
The Handshower shall be of solid brass construction while incorporating a non-metallic handshower engine. Handshower shall have a
multi-function shower engine with 3 spray modes incorporating rubber nozzles to facilitate easy cleaning. Handshower shall incorporate
twin back-check valves within the handle. Handshower shall have a 1/2" NPSM inlet fitting and 4" (10.2 cm) showerhead diameter while
operating at 2.0 gallons (7.6 liters) per minute maximum flow rate. Handshower shall be Newport Brass Model 281-1/___.
Add "Color / Finish" suffix to Model number, below.
Colors / Finishes
15:
15S:
26:
10B:
Polished Nickel
Satin Nickel
Polished Chrome
Oil Rubbed Bronze
• Other: Refer to the Newport Brass catalog for
additional color/finish options.
©2011 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
Specified Model
Model Description Colors / Finishes
281-1 Handshower 15 15S 26 10B Other