Newport Brass 22-51 & 52 - Manual (Page 3)

8/30/02
2
Wire Light Fixture to Outlet
Support Fixture during wiring process.
A. First attach setscrew into fixture base.
B. Strip, clean and twist together black fixture wire with live outlet wire. Next, strip, clean
and twist together white fixture wire with neutral outlet wire. Use wire nuts to secure
connections and cover all exposed wires.
C. Connect fixture/outlet ground wire(s) to mount plate using washer and ground screw.
3
Mount Light Fixture to Wall
Remove bulbs and shut off power prior to step 3.
A. Tuck wires back into the electrical outlet box behind
wall mount plate.
B. Rotate fixture slightly to locate the strap hook into wall
plate notch, located at the top.
C. Continue rotating down to locate setscrew slot into
wall plate tab, located at the bottom.
D. Tighten setscrew to firmly secure fixture into place.
E. After completing wall mount installation, install
bulb(s), (Max. 60 watt, Type B, Candelabra
Base Bulb - not included).
F. Install shade(s), Turn on power.