KIA Rio_Rio5 2005 - Manual (Page 87)

The starter will not operate if:
• Automatic transaxle - the shift lever is NOT in P
(Park) or N (Neutral).
• Manual transaxle - the clutch pedal is not fully
depressed.
Excessive engine noise (from valve tappets) may occur
if the engine has not been operated for an extended
period.
The noise should stop after the engine has reached
normal operating temperature.
If the noise does not stop, have the vehicle inspected
by an Authorized Kia Dealer.
Driving Your Vehicle
4-6
✽
NOTICE
Do not engage the starter for more than
10 seconds. If the engine stalls or fails to start,
wait 5 to 10 seconds before re-engaging the
starter. Excessive or improper use of the starter
may damage it.
✽
NOTICE
This spark ignition system complies with
Canadian ICES-002.
RIO ENG CNA 4.qxd 7/29/05 5:06 PM Page 6