KIA Rio_Rio5 2005 - Manual (Page 14)

This device complies with Industry Canada
Standard RSS-210. Operation is subject to the follow-
ing two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including
interference that may cause undesired operation of
the device.
Battery Replacement
The transmitter uses a 3-Volt, lithium-type battery. The
battery will normally last for several years. If it ever
needs replacement, use the following procedure:
1. Using a screwdriver, loosen the screw on the back of
the transmitter and pry the back off with a thin tool.
2. Remove the battery from the back.
3. Insert a new battery, making sure the “Plus(+)” side
faces down, and reassemble the transmitter.
Knowing Your Vehicle
3-4
✻ ✻
NOTICE
Using an incorrect battery can cause the transmit-
ter to malfunction. Make sure the replacement
battery has the same specification as the battery it
replaces.
1V2B03006
WARNING
Changes or modifications not expressly
approved by the party responsible for compli-
ance could void the user's authority to operate
the equipment.
RIO ENG CNA 3.qxd 7/29/05 5:13 PM Page 4