KIA Rio_Rio5 2005 - Manual (Page 132)

To defrost outside windshield
1. Set the mode selection knob to the position.
When you select position, the system automati-
cally turns on the outside (fresh) air mode.
2. Set the temperature control knob to the extreme
right/hot position
3. Set the fan speed control knob to the “3” or “4”
position.
1 2 3
• For maximum defrosting, set the temperature con-
trol knob to the extreme right/hot position and the
fan speed control knob to the highest speed.
• If warm air to the floor is desired while defrosting
or defogging, set the mode selection knob to the
position.
• Before driving, clear all snow and ice from the
windshield, rear window, outside rear view mirrors,
and all side windows.
• Clear all snow and ice from the hood and the air
inlet in the cowl grille to improve heater and
defroster efficiency and to reduce the probability of
fogging on the inside of the windshield.
4-51
2FDA402
RIO ENG CNA 4.qxd 7/29/05 5:06 PM Page 51