Sena Bluetooth SMH5-FM v1.3 User's Guide - Manual (Page 27)

SMH5-FM
28
11.11 Music Sharing
You can start sharing music with an intercom friend using Bluetooth
stereo music during a two-way intercom conversation. When you
terminate music sharing, you can go back to the intercom conversation.
To start or terminate sharing music, press and hold the Jog Dial for 1
second during an intercom conversation until you hear a double beep
and you and your intercom friend will listen to or terminate sharing
music. To track forward or track back, rotate while pressing down the
Jog Dial clockwise or counter clockwise.
Note:
1. Both you and your intercom friend can remotely control music playback
during music sharing such as track forward and track back.
2. When you have an incoming call, make a phone call, or hear the turn-
by-turn voice instruction of GPS during music sharing, the function will
be paused.
3. In order to share music, make sure that you update both headsets with the
firmware that has the music sharing feature, and enable the EDR setting
in the Sena Device Manager.
11.12 Reset to Factory Default Settings
1. To restore the SMH5-FM to factory default settings, press and hold
the Phone Button for 12 seconds until the LED shows solid red and
you hear high tone double beeps. You will also hear a voice prompt
saying “Factory reset”.
2. Within 5 seconds, press the Jog Dial to confirm reset. The headset
will be restored to factory setting and switched off automatically.
You will hear a voice prompt saying “Headset reset, good-bye”.
3. If you don’t press the Jog Dial within 5 seconds, the reset attempt
is canceled and the headset returns to stand-by mode. You will
hear a voice prompt saying, “Canceled”.