Sena Bluetooth SMH5-FM v1.3 User's Guide - Manual (Page 12)

English
SMH5-FM
13
5. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
6. The mobile phone confirms that pairing has completed and the
SMH5-FM is ready to use. You will hear a voice prompt saying
“Your headset is paired”.
6.2 Bluetooth Stereo Device Pairing
1. If the Bluetooth stereo device is integrated with the mobile phone
such as smartphones, you don’t need to pair the SMH5-FM with it
separately. When the SMH5-FM is paired with the mobile phone, it
is also paired as a stereo music device.
2. If you have a stand alone Bluetooth stereo device, follow the
pairing procedure separately. The procedure is the same as the
procedure of “6.1 Mobile phone pairing”.
Note:
1. If Bluetooth connection between the headset and a mobile phone is
disconnected, tap the Phone Button to recover the Bluetooth connection
immediately.
2. If Bluetooth connection between the headset and a media player is
disconnected, press the Jog Dial for 1 second to recover the Bluetooth
connection and play.
6.3 Bluetooth GPS Navigation Pairing
You can listen to voice instruction from Bluetooth GPS navigation.
Some GPS systems use mobile phone profile (HFP, Hands-Free
Profile) and others use stereo music profile (A2DP, Advanced
Audio Distribution Profile). Most motorcycle specific GPS systems
use mobile phone profile for turn-by-turn voice instruction. You can
simultaneously use a mobile phone and a GPS which uses mobile
phone profile by one of the following procedures.
6.3.1 Multipoint GPS Pairing
If you use GPS only for turn-by-turn voice instructions, not for Bluetooth
stereo music streaming, multipoint pairing is recommended for the
GPS connection. Multipoint Bluetooth pairing allows the SMH5-FM
to connect two HFP devices at the same time: mobile phone and
GPS navigation. Follow the steps below to pair the GPS using the
multipoint pairing.
1. Turn on the headset and press the Jog Dial for 5 seconds until the
red LED is rapidly flashing and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then the LED turns
to blue flashing and the beeps turn to high tone double beeps.
You will hear a voice prompt saying “Multipoint pairing”.
3. Search for Bluetooth devices on the GPS navigation screen. Select
the Sena SMH5-FM in the list of the devices detected on the GPS.
4. Enter 0000 for the PIN.