Sena Bluetooth SMH5-FM v1.3 User's Guide - Manual (Page 17)

SMH5-FM
18
You can set the configuration of the SMH5-FM by the voice menu
instruction as below.
1. To enter into voice configuration menu, press and hold the Jog
Dial for 12 seconds until the LED shows solid blue and you hear
high tone double beeps. You will also hear a voice prompt saying
“Configuration menu”.
2. Rotate the Jog Dial clockwise or counter-clockwise to navigate
between the menus. You will hear voice prompts for each menu
items as below.
3. You can enable the feature or execute the command by tapping
the Phone Button, or disable the feature by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the SMH5-FM will
exit the configuration and goes back to stand-by mode.
5. If you want to exit the configuration immediately, rotate the Jog Dial
until you hear a voice prompt saying “Exit configuration”, and tap
the Phone Button.
10. SMH5-FM CONFIGURATION SETTING
The voice prompt for each menu item is as below:
(1) Speed dial (4) Voice prompt
(2) RDS AF (5) Delete all pairings
(3) VOX phone (6) Exit configuration
Speed dial
Exit configuration
Delete all pairings
RDS AF
VOX phone
Voice prompt
10.1 Assigning Speed Dial
Voice Prompt “Speed dial”
Factory Default N/A
Execute Tap the Phone Button
1. To assign a phone number as a speed dial, rotate the Jog Dial until
you hear a voice prompt saying “Speed dial”.