Sena Bluetooth SMH5 v1.3 User's Guide User Manual

Page 8

English

SMH5

In the case of the wired microphone included in the “Full-face

Helmet Kit”, attach the enclosed velcro pad for wired microphone

to the inside of the chin guard for full-face helmets. Place the wired

microphone on the velcro pad and attach it to the connector of the

speaker cable.

6. When you use the boom microphone included in the “Basic Kit”,

please make sure that the fin side of the microphone is facing

outward; away from your lips. You can easily recognize it by

touching the fin with your fingers.

fin

7. To remove the headset main unit from the clamp, please make sure

to pull out the speaker cable connector from the main unit first.

Then, remove the main unit from the clamp.