12 fault reset, Firmware upgrade – Sena Bluetooth SMH5 v1.3 User's Guide User Manual
Page 25
SMH5
26
11.12 Fault Reset
When the SMH5 is not working properly or is in faulty status for any
reason, you may reset by pushing the pin-hole reset button at the
back of the headset main unit. Insert a paper clip into the reset pin-
hole and press the reset button for a second with light pressure.
The SMH5 will be switched off after which time, you have to turn
the system back on and try again. However, this will not restore the
headset to factory default settings.
12. FIRMWARE UPGRADE
The SMH5 supports firmware upgrade function. Please visit Sena
Bluetooth web site at www.SenaBluetooth to check the latest
software downloads.