Sena Bluetooth SMH5 v1.3 User's Guide - Manual (Page 15)

SMH5
16
8. PAIRING WITH OTHER SMH5 HEADSETS
FOR INTERCOM CONVERSATION
The SMH5 can be paired with up to three other headsets for Bluetooth
Intercom conversation.
1. Turn on the two SMH5 headsets (A and B) that you would like to
pair with each other.
2. Press and hold the Jog Dial of the headset A and B for 5 seconds
until red LEDs of the both units start to flash rapidly. You will hear
a voice prompt saying “Intercom pairing”.
3. Simply tap the Jog Dial of any one of the two headsets A or
B (It doesn’t matter that you choose A or B) and wait until the
LEDs of both headsets turn to blue and intercom connection is
automatically established. The two SMH5 headsets A and B are
paired with each other for intercom conversation. If the pairing
process is not completed within one minute, the SMH5 will return
to stand-by mode.
A
B D
C
Pairing A & B
4. You can make other pairings between the headset A and C, and
between the headset A and D by following the same procedure as
above.
A A
B B D D
C C
Pairing A & C Pairing A & D