beautypg.com

9 function priority, 10 music sharing, 11 reset to factory default settings – Sena Bluetooth SMH5 v1.3 User's Guide User Manual

Page 24

background image

English

SMH5

25

11.9 Function Priority
The SMH5 operates in the following order of priority:

(Highest) Mobile Phone,

Intercom,

Music sharing by Bluetooth stereo music,

(Lowest) Bluetooth Stereo Music

A lower priority function is always interrupted by a higher priority
function. For example, stereo music is interrupted by intercom call,
and intercom conversation is interrupted by incoming mobile phone
call.
11.10 Music Sharing
You can start sharing music with an intercom friend using Bluetooth
stereo music during a two-way intercom conversation. When you
terminate music sharing, you can go back to the intercom conversation.

To start or terminate sharing music, press and hold the Jog Dial for

1 second during an intercom conversation until you hear a double

beep and you and your intercom friend will listen to or terminate

sharing music. To track forward or track back, rotate while pressing

down the Jog Dial clockwise or counter clockwise.

Note:
1. Both you and your intercom friend can remotely control music

playback during music sharing such as track forward and track
back.

2. When you have an incoming call, make a phone call, or hear the

turn-by-turn voice instruction of GPS during music sharing, the
function will be paused.

3. In order to share music, make sure that you update both headsets

with the firmware that has the music sharing feature, and enable the
EDR setting in the Sena Device Manager.

11.11 Reset to Factory Default Settings
1. To restore the SMH5 to factory default settings, press and hold the

Phone Button for 12 seconds until the LED shows solid red and you

hear high tone double beeps. You will also hear a voice prompt

saying “Factory reset”.

2. Within 5 seconds, press the Jog Dial to confirm reset. The headset

will be restored to factory setting and switched off automatically.

You will hear a voice prompt saying “Headset reset, good-bye”.

3. If you don’t press the Jog Dial within 5 seconds, the reset attempt

is canceled and the headset returns to stand-by mode. You will

hear a voice prompt saying, “Canceled”.