Warning, E, f, g or h j or o, Attaching adapter plate to display – Peerless-AV DST660 - Installation User Manual
Page 8: Fig. 4.1, Fig. 5.1
8 of 9
ISSUED: 12-16-11 SHEET #:125-9272-1
• If screws don't get three complete turns in the screen
inserts or if screws bottom out and bracket is still
not tightly secured, damage may occur to screen or
product may fail.
WARNING
4
Use figure 5.1 to determine placement of adapter brackets (
R) on the adapter plate (B) using
1/4-20 nylock nut (
S) as shown.
NOTE: For displays with 400mm x 400mm VESA hole patterns
adapter brackets (
R) are not used.
NOTE: For displays with 800mm, or 600mm VESA hole pattern use ACC-V800X (sold separately).
5
DEDICATED
MOUNTING PATTERNS
15.75"
(400
mm
)
7.87"
(200
mm
)
11.81"
(300
mm
)
7.87"
(200
mm
)
3.94"
(100
mm
)
1.97"
(50
mm
)
BACK VIEW
DISPLAY NOT SHOWN
FOR CLARITY
11.81"
(300
mm
)
M4 x 12 mm screws (
F)
with #8 washers (
J)
M6 x 12 mm screws (
H)
with 1/4" washers (
O)
M8 x 12 mm screws (
E)
E, F, G or H
J or O
Attaching Adapter Plate to Display
Determine hole pattern of display and fasteners used.
Hand thread screws (
E, F, G or H) through washers (J or O)
and adapter brackets (
R) into screen as shown in figure 4.1.
M5 x 12 mm screws (
G)
with 1/4" washers (
O)
fig. 4.1
R
R
B
fig. 5.1
S
B
M10 x 15 mm socket
screws (
I) in (200 mm)
position when mounting
PLP adapter plate
PLP
ADAPTER
PLATE