Peerless-AV DST660 - Installation - Manual (Page 7)

7 of 9 ISSUED: 12-16-11 SHEET #:125-9272-1
Place adhesive strips ( K) on the wall plate (A) in location that will allow the most contact with CPU
as shown in figure 2.1.
Note: Placement of adhesive strips will vary depending on size of CPU as shown in figure 2.2
2
NOTE: Safety belt may need to be loosened to attach CPU to wall plate (A).
Press CPU against adhesive strips on wall plate and tightly secure safety belt against CPU.
3
CPU
A
K
A
SAFTEY
STRAP
fig. 2.1
Placement of Adhesive Strips
Attach CPU to Wall Plate
fig. 2.2
FRONT VIEW