Peerless-AV HLG442-SH - Installation - Manual (Page 3)

ISSUED: 12-05-08 SHEET #: 090-9160-4 10-05-09
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
3 of 7
Rotate the swivel base so large holes in race box align with mounting holes in swivel base as shown in figure 1.1.
Place race box on mounting surface in the desired location.
Be certain locking tab is facing back then attach swivel base to mounting surface using three wood screws (C) as
shown in figure 1.2.
Note: If swivel restriction is desired, use spacer (D) and screw (C) in hole closest to locking tab, then refer to swivel
restriction option, step 1.2. If swivel restriction is not required, skip to step 2. 1
MOUNTING
SURFACE
fig 1.2
C
ALIGN MOUNTING HOLE
WITH LOCKING TAB
fig 1.1
LOCKING TAB FACES BACK
LARGER HOLES IN
RACE BOX
MOUNTING HOLE IN
SWIVEL BASE
A
LOCKING TAB
FACES BACK
MOUNTING
SURFACE
A
D
Detail 1
RACE BOX
SWIVEL BASE