Peerless-AV SC551GL - Installation - Manual (Page 5)

5 of 35 ISSUED: 02-25-11 SHEET #: 009-9050-3 09-09-13
A
M
R
C
H
Attach column assembly ( A) to glass base (C) with two M8 x 30mm screws (M), two M8 washers (R) and rear
caster support bar ( H).
2
Attach front casters ( F) to front caster plates (P) with four M6 x 8mm screws (N) and four M6 washers (Q) as
shown in figure 1.1.
Attach front casters (
F) to front of glass base (C) with two M6 x 15mm screws (L), two M6 washers (Q), and two
flat head cap screws ( K) as shown in figure 1.2.
Attach rear casters ( G) to caster plate (H) with four M6 x 8mm screws (N) and four M6 washers (Q) as shown in
figure 1.3.
1
L
H
G
Q
Q
P
N
N
F
F
Q
C
K
fig. 1.3
fig. 1.2
Attaching Glass Base
fig. 1.1