Peerless-AV HT642-004 - Installation - Manual (Page 7)

7 of 10 ISSUED: 09-20-11 SHEET #: 125-9245-1
BACK OF DISPLAY
200 mm x 100 mm HOLE
PATTERN SHOWN ABOVE
2
7.87"
(200mm)
.98"
(25mm)
7.87"
(200mm)
BACK OF DISPLAY
D
MOUNTING HOLE LOCATIONS
A
B
DISPLAY
Attaching Adapter Brackets to Display
DETAIL 1
L
Using information provided in detail 1 secure adapter brackets ( A and B) to back of display using four
M4 x 12 mm socket pin screws ( D), with #8 washers (C) using 18" long 4 mm allen wrench (G) as shown below.
NOTE: Make sure that screws are centered in hole in adapter brackets.
Skip to step 3
Attaching Adapter Brackets using VESA 200 x 100 Mounting Pattern