Peerless-AV LCW620AD - Installation - Manual (Page 7)

7 of 10 ISSUED: 07-25-11 SHEET #: 090-9206-5 11-29-12
N
B
O
A
L
L
M
K
K
Secure arm assembly (B) to dual arm support (Q)
with one M6 x 12mm phillips screw (K), one M6
plastic washer (L) and angled cover (M).
Repeat steps three and four for second arm
assembly (B).
4
Insert dual arm support (O) onto wall plate (A) as shown in fi gure 3.1. Secure dual arm support (O) with one
M6 x 8mm phillips screw (K), one M6 plastic washer (L) and fl at cover (N).
Insert arm assembly (B) onto dual arm support (O) as shown in fi gure 3.2.
Tighten set screw on arm assembly (B) using 2.5mm allen wrench (J) as shown in fi gure 3.3.
3
fi g. 3.1 fi g. 3.2 fi g. 3.3
SET SCREW
B
ADAPTER PLATE
Hook adapter plate onto arm assembly (B). 5