Peerless-AV HP437-C# (52-63) - Installation - Manual (Page 7)

7 of 9
ISSUED: 12-13-2013 SHEET #: 125-9086-9
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800 865-2112
200 x 100 mounting pattern. Use four M4 x 12 mm phillips screws
200 x 200 mounting pattern. Use four M6 x 12 mm phillips screws
200 x 100 mounting pattern. Use four M4 x 12 mm phillips screws
200 x 100 mounting pattern. Use four M4 x 12 mm phillips screws
200 x 100 mounting pattern. Use four M4 x 12 mm phillips screws
Mounting Hole Patterns
9
Select desired mounting pattern from list below.
NOTE: Make sure that jack inputs on the back of the display are not covered by the adapter bracket box. Move the
vertical adapter brackets up or down accordingly to ensure accessibility.
X
X
DISPLAY JACK INPUTS
ADAPTER BRACKET BOX
Attach adapter bracket box ( F) to support tube (A) with two 1/4-20 x 1/2" phillips screw (J) and 1/4" split
washer ( U) as shown in fig 7.1.
8
A
F
U
J
A
F