Peerless-AV DS-VWS546-2X2 - Installation - Manual (Page 6)

6 of 11 ISSUED: 01-16-13 SHEET #: 125-9398-1 01-16-13
2.1 2.2
3
Attach FPZ-600 main tubes ( C) to FPZ-600 base (B)
using eight set screws ( F).
Secure video wall mount assembly to FPZ-600 main
tubes ( C) to clamps (A) using twelve M6 x 40mm
phillips screws ( e) with fender washers (D).
BASe PLATe ASSeMBLY OPTIONAL: LeVeLLINg BASe USINg
BUMPeR STRIP
BRACkeT ASSeMBLY
B
e
D
A
C
F
C
I
g
B
For some situations, bumper strip ( g) may be required
to keep base ( B) level. cut bumper strip into five equal
pieces and adhere one piece to each corner and one
piece to center of bottom side of base.
Note: The bumper strip pieces may also be used in
other locations to properly level stands.