Peerless-AV DS-VWC560 - Installation - Manual (Page 6)

6 of 12 ISSUED: 03-08-11 SHEET #: 125-9195-5 09-20-12
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112.
4
Attach four swivel casters [ 127mm] (E) to vertical supports (A) using sixteen M8 x 25 mm pan phillips screws (G),
split washers ( I) and 5/16" SAE flat washers [8mm] (H).
G
I
H
A
E
X
X = HEIGHT OF DISPLAY
A
D
DETAIL 1
DISPLAy HEIGHT
DISTANCE
EQUALS
DISPLAy
HEIGHT
1. Locate the position of the lower horizontal rail (D) and attach to vertical supports (A).
2. Use display height to determine location of upper horizontal rail (D),
NOTE: Lowest horizontal rail (D) position shown in detail 1.
NOTE: Horizontal rails (D) must be secured using sixteen 1/4-20 x 3.5" hex head screws (J).
Determine position of horizontal rails ( D) using the formula below.
5
UPPER HORIZONTAL RAIL
LOWER HORIZONTAL RAIL