Peerless-AV HP450 - Installation - Manual (Page 6)

ISSUED: 08-17-07 SHEET #: 090-9126-9 08-01-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800 865-2112
6 of 6
For installing screens with a VESA 100 hole pattern: Using the 4mm allen wrench (J), attach universal adapter
plate ( e) to adapter plate (D) using four M4 x 12 mm serrated socket pin screws (I) as shown in figure 9.1.
For installing screens with Universal Adapter Plate: Using the penta-pin driver (Q), attach universal adapter
plate ( e) to adapter plate (D) using four M10 x 15 mm penta-pin screws (o) as shown in figure 9.2.
Note: For universal adapter plate (e), refer to the main instruction for further installation.
SCReen
D
I
© 2010 Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
9
Note: Adapter plate support box (D) can be flipped either way to allow necessary screen clearance. For best
results, have screen close to desktop but not touching.
Adapter plate support box ( D) is adjustable up to 6" at 1" increments. Attach adapter plate support box (D) to
support tube ( A) as shown in fig 8.1, then fasten two 1/4-20 x 1/2" phillips screws (H) and two split washers (G)
through adapter plate support box ( D) and support tube (A), as shown in fig. 8.2.
fig. 8.1
A
D
fig. 8.2
H
8
D
SuPPoRtING SuRFACe Not SHoWN FoR CLARItY
FOR SCREENS WiTH VESA 100 HOLE PATTERN FoR uNIVeRSAL ADAPteR PLAte
SuPPoRtING SuRFACe Not SHoWN FoR CLARItY
e
o
UnIveRSAl
ADAPTeR
fig. 9.1 fig. 9.2
G
D