Fi g. 7.1 – Peerless-AV PLA50 - Installation User Manual

Page 9

Text mode
Original mode

9 of 10

ISSUED: 05-03-06 SHEET #: 202-9127-4 06-29-11

7-1

Depending on the specifi c size & weight of the plasma, articulating swing arm may be angled at different positions,
causing plasma to appear to lean sideways at different articulating positions. Tilt-roll assembly (B) allows plasma
to be manually adjusted, so plasma can be horizontal at all positions. To adjust, gently rotate plasma by hand to
desired position.

If it is too diffi cult to adjust roll of plasma, loosen screws shown in fi gure 7.1 using a phillips screwdriver.

IMPORTANT! Do not loosen or tighten screws more than 1/8 turn.

All other brand and product names are trademarks or registered trademarks of their respective owners.

ARTICULATING

ARM

PLASMA

fi g. 7.1

ROLL

ADJUSTMENT

SCREWS