Peerless-AV HDS-OWRE-200 - Installation - Manual (Page 15)

15 of 22 ISSUED: 08-24-12 SHEET #: 180-9030-1
Hook M10 x 15 mm screws into keyslots of wall arm adapter plate as shown fi gure 7.1.
Insert two M10 x 15 mm screws (included with wall arm) into bottom holes of adapter plate as shown in fi gure 7.2.
Tighten all fasteners with a 6 mm allen wrench.
Skip to step 11.
7-1
ADAPTER PLATE
DISPLAY NOT
SHOWN FOR
CLARITY
DISPLAY NOT
SHOWN FOR
CLARITY
• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the display.
• Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten M10 x 15 mm
screws to 40 in. • lb. (4.52 N.M.) maximum torque.
WARNING
Mounting Flat Panel Display
7
1/4"
M10 X 15 MM SCREW
fi g. 7.1
fi g. 15.2
M10 X 15 MM SCREW
WALL ARM ADAPTER PLATE
WALL ARM