Warning – Peerless-AV HP447 - Installation User Manual

Page 6

ISSUED: 06-19-12 SHEET #: 125-9327-4 08-6-12

6 of 7

NOTE: Adapter plate support box (D) can be flipped either way to allow necessary screen clearance.

For best results, have screen close to desktop but not touching.

Adapter plate (

D) is adjustable up to 7.87'' (200 mm) " at .984" (25mm) increments. Attach adapter plate (D) to

support tube (

A) as shown. Fasten two 1/4-20 x 3/4" hex head screws (H) through adapter plate (D) and support

tube (

A), as shown.

SUPPORTING SURFACE NOT SHOWN FOR CLARITY

fig. 7.2

fig. 7.1

Optional

• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not

tightly secured, damage may occur to screen or product may fail.

WARNING

1/8"

FOR SCREENS WITH VESA 200 X 200 PATTERN SHOWN

SCREEN

Fasten two socket pin screws (

I, O, or P) into top mounting holes in back of screen leaving 1/8" of exposed thread

as shown below. Hook exposed threads onto top of adapter plate (

D) as secure using two socket

pin screws (

I, O, or P). NOTE: When using socket pin screw (I), #10 flat washers (Q) are required.

(I, O, or P)

Mounting using 200 mm x 200 mm Hole Pattern